The Clip provides vehicle specific, consumer installable, in-vehicle mounting solutions for your Device e.g. Cell Phone, Mobile Phone, Smart Phone, iPhone, BlackBerry, PDA, GPS navigation, PND, MP3 Player, Satellite Radio, Two-way Radio, Mobile Computer etc. Average installation time is 2 minutes, and anyone can do it. No dismantling of your dashboard is required and there is no damage to your vehicle's interior. Our philosophy is to provide customers with the same level of quality they expect from the vehicles and devices they are using. The result is innovative, convenient, secure, easy-to-install mounting solutions that provide a safer and more enjoyable driving experience. No drilling or damage to the interior is required. It can be easily removed.

Step 1: Pick your mount

Step 2: Pick your device holder

The Clip Vent, firmly attaches, and specifically molded for your car.

The Clip Tunnel, firmly attaches, and specifically molded for .

The Clip Console, firmly attaches, and specifically molded for .

Tired of manually connecting/disconnecting your device from your external cable, or stretching over the floor console in your car to reach into the glove compartment and connect/disconnect your device from your stereo integration cable? A pass through connector is permanently attached to the Holder?s base so you can connect any cable e.g. iTronic Audio/ Video Cables etc. that would fit directly into the bottom of the device to the base of the Holder and pass the connection up into your device. You are then able to leave the cable connected to the Holder and you can now easily dock/undock your device without having to manually connect/disconnect your cable. You can also easily switch between cables. The cable clicks into the Holder and releases by pressing on the buttons on each side of the cable plug.

This Adjustable Holder with Pass-Through Connector is designed for the Apple iPhone and Touch with silicone type cases e.g. iSkin, Jam Jacket, Speck, XtremeMac, Showcase etc. The Holder will adjust from a width of 2.3 inches/60mm to 3.2 inches/82mm and allows you to connect any cable e.g. iTronic Audio/ Video Cables etc. that would fit directly into the bottom of the device to the base of the Holder and pass the connection up into your device. You are then able to leave the cable connected to the Holder and you can now easily dock/undock your device without having to manually connect/disconnect your cable. You can also easily switch between cables. The cable clicks into the Holder and releases by pressing on the buttons on each side of the cable plug.

This Adjustable Holder with Pass-Through Connector is designed for the Apple iPod model of your choice. The Holder allows you to connect any cable e.g. iTronic Audio/ Video Cables etc. that would fit directly into the bottom of the device to the base of the Holder and pass the connection up into your device. You are then able to leave the cable connected to the Holder and you can now easily dock/undock your device without having to manually connect/disconnect your cable. You can also easily switch between cables. The cable clicks into the Holder and releases by pressing on the buttons on each side of the cable plug.

This Adjustable Holder with Pass-Through Connector is designed for the Apple iPhone and Touch with silicone type cases e.g. iSkin, Jam Jacket, Speck, XtremeMac, Showcase etc. The Holder will adjust from a width of 2.3 inches/60mm to 3.2 inches/82mm and allows you to connect any cable e.g. iTronic Audio/ Video Cables etc. that would fit directly into the bottom of the device to the base of the Holder and pass the connection up into your device. You are then able to leave the cable connected to the Holder and you can now easily dock/undock your device without having to manually connect/disconnect your cable. You can also easily switch between cables. The cable clicks into the Holder and releases by pressing on the buttons on each side of the cable plug.

We have a device holder for nearly every phone, GPS, and music device made. Just tell us the name and model of the device and we will send you the correct holder for it